ELIMIA 2.5-4-480N4X-DOL Combination Motor Starter Cms Nema 1.5 480V

( Brand: Elimia ), ( Model: CMS 2.5-4-480N4X-DOL ), ( Type: Combination Starter ), ( Hp: 1.5 2hp 460-480v ), ( Country Of Manufacture: United States ), ( Manufacturer Part Number: 2.5-4-480N4X-DOL ), ( Overload Trip Rating: 2.5-4 Amps )

Review ELIMIA Combination Motor Starter Cms 1.5 Hp 480v Nema 4x Ul

The Elimia CMS 1.5 HP 480V Nema 4X Combination Motor Starter is a versatile and reliable electrical component designed to start and control motors up to 1.5 horsepower with a voltage rating of 480 volts. This starter is manufactured in compliance with the NEMA 4X standard, making it suitable for use in hazardous locations or environments where protection against water, oil, and other corrosive substances is essential.

The Elimia CMS is a combination starter, which means it integrates both a contactor and a overload relay into a single housing. The contactor serves to make and break the electrical circuit connecting the motor to the power supply, while the overload relay monitors the motor's current draw and trips the circuit if it exceeds a predetermined level, thus protecting the motor from damage caused by overloading.

This starter features a 2.5-inch by 4-inch by 4-inch NEMA 4X enclosure, which is constructed from heavy-duty aluminum and is sealed against the ingress of water and other contaminants. The enclosure is also ventilated to dissipate heat and prevent the buildup of dangerous temperatures during operation.

The Elimia CMS 1.5 HP 480V Nema 4X Combination Motor Starter is designed for easy installation and maintenance. It comes with a mounting plate and hardware, making it simple to install on a DIN rail or other suitable surface. The starter also has clear labeling on the terminal posts, which makes identifying and connecting wires a straightforward process.

Additionally, the Elimia CMS is equipped with a number of safety features to ensure reliable and safe operation. These include a thermal overload protection, which trips the circuit if the motor overheats, and a short-circuit protection, which disconnects the motor from the power supply if a short circuit is detected.

In summary, the Elimia CMS 1.5 HP 480V Nema 4X Combination Motor Starter is a robust and versatile electrical component that is ideal for starting and controlling motors in harsh environments. Its NEMA 4X rating, combination design, and numerous safety features make it a reliable and safe choice for a wide range of industrial applications.

The Elima 2.5-4-480N4X-DOL Combination Motor Starter CMS 1.5 HP 480V NEMA 4X is a motor starter designed for industrial applications. Here are some pros and cons that may help you make an informed decision about purchasing this device:

1. Versatile: This motor starter is suitable for both induction and resistance load applications, making it a flexible option for various industrial settings.

2. Robust: The device is designed with a heavy-duty construction, which can withstand the rigors of industrial environments. It is also sealed to prevent the intrusion of dust and water, ensuring reliable operation.

3. Easy to Install: This motor starter comes with a user-friendly design, which makes installation straightforward and hassle-free. It also features a clear and intuitive labeling system for easy identification of terminals.

4. Cost-Effective: This motor starter offers a cost-effective solution for controlling and starting motors in industrial applications. It is also energy-efficient, reducing energy consumption and saving money on electricity bills.

5. Safe: The device is equipped with overload protection, short-circuit protection, and ground fault protection, ensuring the safety of operators and the equipment.

1. Limited Capacity: This motor starter is only suitable for motors with a maximum capacity of 1.5 HP and 480V. It may not be sufficient for larger applications.

2. Lack of Advanced Features: This motor starter does not offer advanced features such as soft-start or variable speed control. It is designed for basic motor starting and stopping applications.

3. Limited Mounting Options: This motor starter has limited mounting options and can only be mounted in a horizontal position.

The Elima 2.5-4-480N4X-DOL Combination Motor Starter CMS 1.5 HP 480V NEMA 4X is a reliable and cost-effective option for controlling and starting motors in industrial applications. Its heavy-duty construction, easy installation, and robust safety features make it a popular choice for many industries. However, it may not be suitable for larger applications or those requiring advanced motor control features.

If you require a motor starter for a small to medium-sized industrial application that does not require advanced features, then the Elima 2.5-4-480N4X-DOL Combination Motor Starter CMS 1.5 HP 480V NEMA 4X is a good choice. Its versatility, reliability, and safety features make it a valuable addition to any industrial setting. However, if you require a motor starter with advanced features or a larger capacity, then you may need to consider other options.

Details:

All components mounted to a removable back panel and pre-wired. All units are certified UL508A, industrial control panels. Specifications for this unit: UL508A certified industrial control panel. NOTE: photos may be of similar model, please review specs using the model number this listing.

Designed with momentary type switches and pre-wired latch that breaks circuit during overload or loss of main power. In addition to our standard products we design and built custom control panels packaged drives. All components used in our assemblies are UL Certified. Arrives as seen with all interconnecting wiring complete.

The control voltage is the used to activate coil of contractor. Pre-wired for easy installation. Guarantee: Satisfaction Guaranteed. Warning label and identifying.

Many options available. This enclosure does not provide knockouts for wiring. Our overloads can be set for manual or automatic reset operation. This is for a new enclosed magnetic motor starter with disconnect and circuit breaker designed to start, stop protect machines.

The overload will have an adjustable Amperage range. The overload control is pre-wired by Elimia in a way that trips the starter. Note: the power source for control wiring of this starter is pre-wired and sourced from your feeder directly on line side. Provides protection from water/dust/oil.

This assembly comes with a premium enclosure hinge door. Components mounted on a easy to remove back plate. Also includes NEMA 4X rotary motor disconnect, to meet NEC requirements with lock out tag capability. Available in 230V up to 50HP and 480V 100HP.

But is some cases you might want the control voltage to be different for a host of reasons. This is done to protect your equipment and one of the main purposes a motor starter. Your overload choice is based on your machines FLA.

part #: 254480n4x prices

• $169.00-$376.00

specifications stigstarters:

• brand: Elimia
• model#: CMS 2.5-4-480N4X-DOL
• type: Combination Starter
• hp: 1.5 2hp 460-480v
• country of manufacture: United States
• manufacturer part number: 2.5-4-480N4X-DOL
• overload trip rating: 2.5-4 Amps

general stigstarters:

• Drives Starters > Starters > Combination Starters
• condition: New

payments stigstarters:

• wallet: Google-pay
• credit card: Visa
• other

offer stigstarters:

• quantity: 10
• availability: In Stock
• options: Ship-to-home
• started: April 25, 2026
• sold: 0

returns stigstarters:

• method: Money back
• policy: Returns Accepted
• paid by: Buyer
• time: 30 Days

shipping stigstarters:

• transit: 3-6 Days
• type: Calculated
• class: Standard, Expedited, One-day
• service: UPS Ground, USPS Priority Mail, UPS Next Day Air Saver
• carrier: UPS, USPS
• cost: $23.80

seller stigstarters:

• rating: 100.0%
• city: Fort Payne, Alabama
• # reviews: 9300

Elimia 2.5-4-480N4X Is Similar To:

• Elimia 18-25-480n4x-dol 25hp 3ph Starter Control Box With A Bm3vhb-040 Motor Protector (44% similar) 25HP starter control box with a BM3VHB-040 - motor protector it was built for a motor and is new Hans been used...(January 9th, 2025)
• Elimia 22-32-480t120-n4x-hoa Hoa Combination Motor Starter 22-32 Amp 20 Hp Hd 480v With 120v Transformer (64.1% similar) Picture might show a model with different rated components, use for sizing, picture is generic. Elimia manufacturers standard and custom motor controls. Assembled in a nice nema 4x poly carbonate enclosure. All internal wiring is installed, just bring in main power and load...(March 14th, 2025)
• Elimia 1-1.6-480n4x-dol Combination Motor Starter Cms 1 2 3 4 Hp 480v Nema 4x (87.3% similar) The overload will have an adjustable amperage range. This assembly comes with a premium enclosure hinge door. Note: the power source for control wiring of this starter is pre-wired and sourced from your feeder directly on line side. Provides protection from water/dust/oil. Our overloads...(April 25th, 2026)
• Elimia 1.6-2.5-480n4x-dol Combination Motor Starter Cms 1.6 2.5-480n4x-dol 1 Hp 480v Nema 4x Ul (86.4% similar) Specifications for this unit: UL508A certified industrial control panel. Arrives as seen with all interconnecting wiring complete. Your overload choice is based on your machines Fla. This assembly comes with a premium enclosure hinge door. Our overloads can be set for manual or...(April 25th, 2026)